EV Charger with Load Balancing
Our newest generation of Smart EV charger with DLB dynamic load balance, automatic solar adjustment, App control, scheduled charging and adjustable charge rate.
https://smartevchargers.co.nz/shop/wall-mount-ev-chargers/smart-ev-wall-charger-with-dlb-and-wifi/
This version of the charger has a Type 2 socket on the front and does not come with a cable.
If you would like to buy the charger with cable attached we have them here
100% compatible with all EV’s
Features:
Scheduled charging — edit and add multiple schedules.
Dynamic load balance to monitor your house hold current.
Solar ready, adjust the charge current based on the solar input with the included second CT clamp.
32A 7.2KW Charging or vary the charge rate from the app.
RFID card control.
IP54 weather proof and can be mounted outdoors with no issues.
Input cable can be installed from the bottom or the back to hide the cable.
Led indicator ring light around the charge port
OCCP 1.6j Compatible
App compatible with Apple and Android
This charger is able to add around 50km of charge per hour to your car.
Dyamic Load balance
Install the CT clamp at the mains and this will monitor your total house draw. If this draw exceeds the maximum limit the charge rate will be reduced to avoid tripping the breaker.
RFID cards
Enable the charger with the RFID card or via the app for secure charging.
Dimensions:
200mm x 330mm x 132mm
Weight 2.4kg
Safety features
Over Temperature protection
Overload Current protection
Over/under voltage protection
Earth monitoring
DC and AC leakage protection (No need to install a Type B RCD to keep the cost of install down)
Lightning protection
Installers: A dedicated 40a Type A RCBO must be used on the supply circuit. This is needed with all EV chargers. (or lower if you reduce the charge current via the internal switch)
Save up to $50 by ordering our Type A RCBO at the same time. Electricians typically charge $110+ for these. Money back guarantee if your electrician can supply them cheaper.
Wifi is required for setup. A Wifi extender is recommended if the signal is too low at the charger.
